Drivetrain

Hybrid Racing replacement shifter base bushings are designed to improve shifting precession and eliminate the soft OEM rubber bushings that cause sloppy shifting.The shifter base bushings are a cost-effective way to eliminate unwanted slop in the shifter...

02-06 RSX Type S (K20A2, K20Z1) 06-11 Civic Si (K20Z3) for 6 Speed models only, (5 speed models require RSX Type S Flywheel) The Competition OE replacement clutch kit features OE equivalent clutch disc, pressure plate, pilot bearing, throw...

The K-Tuned K20Z3 No-Cut Shifter is designed to be used in all EF, DA, EG, DC2 and EK chassis and of course, as the title states, it is installed with absolutely no cutting of the exhaust tunnel. On a manual chassis, use the OEM shifter linkage holes for...

Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn’t get the shifter cable set with your engine, you can either try to find them used or get them brand new...

Competition Clutch Stage 2 Street Series works with the following vehicles with 6 speed Transmission. (K20A2 K20Z1 K20Z3) 02-06 RSX Type S 06-11 Civic Si 5 speed models require the use of competition flywheel. The Competition Stage 2 Clutch Kit provides...

K-Tuned Shifter Cable Grommet On K-swapped cars without heater cores and top mounted shifters, most people would pass the shifter cables somewhere through the firewall. Sometimes the existing hole for the heater core is used and sometimes people prefer...

K-Tuned RSX OEM Replacement Shifter Cable Clips (3 Clips, 4 Pins) Did you lose or damaged your shifter cable clips or pins during engine or transmission related work?  Most people have, K-Tuned had realized this is a common problem, and came...

K-Tuned Shifter Cable Bushings are a simple and easy to install upgrade that improves shift feel and accuracy. These bushings are installed on both transmission side connections of the cables and are made with solid 6061 billet aluminum. OEM shifter...

Designed to fit OEM DC5 RSX shifter boxes from K20A, K20A2, K20A3, K20Z1 Engines   This K-Tuned Billet Shifter Arm is a direct replacement upgrade for the oem plastic shifter arm. This billet aluminum arm uses an extremely durable delrin pivot...

K-Tuned Race Spec Shifter Cables are a super strong and stretch resistant replacement for your weaker old oem 02-04 RSX-S cables. These K-Tuned cables are the same length as OEM, and they are compatible with oem and K-Tuned Shifter boxes, as well as...

K-Tuned Shifter Cable Trans Bracket is made with 6061 billet aluminum.  The bracket can be mounted on RSX, EP3 and Civic Si transmissions. This shifter cable bracket is designed to be used with oem or aftermarket 2002-2004 RSX-S shifter and...

Finally!! Hybrid Racing has done it again. A bolt in shifter for K Swap using K20Z3 transmission.  This is currently the only bolt in shifter for K-Swap using the K20Z3 transmission from 8th gen Civic.  Before this shifter was created, the only...