94-01 Integra DC2
88-91 Civic EF
92-95 Civic EG
96-00 Civic EK
The K-Tuned Billet Shifter Base Plate is designed for installing an RSX Type-S or comparable shifter box without cutting a hole in the exhaust tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for exhaust systems with large diameter exhaust pipe.
This K-Tuned Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall.
If you use this setup, you will most likelt have to delete your heater core.
Be aware that this shifter setup does not clear any interior panels or center consoles on any chassis.
Note: This is a machined part made with raw aluminum, the surface of this product may have machine marks and scratches.