K-Tuned K24 Upper Coolant Housing w/ Filler Neck Straight Inlet 16AN

(No reviews yet) Write a Review
SKU:
KT-KUW-24S-F16
UPC:
Does not apply
  • K-Tuned K24 Upper Coolant Housing w/ Filler Neck Straight Inlet 16AN
  • K-Tuned K24 Upper Coolant Housing w/ Filler Neck Straight Inlet 16AN
  • K-Tuned K24 Upper Coolant Housing w/ Filler Neck Straight Inlet 16AN
  • K-Tuned K24 Upper Coolant Housing w/ Filler Neck Straight Inlet 16AN
$172.99

Description

Radiator cap sold separately

Radiator Hose Outet: 16AN

Applications:
 
  • K20Z3 cylinder heads
  • K24 Heads (Excludes K24A1, K24Z, and K24Y)
Note:
* Does NOT fit with the PRB manifold and throttle bodies with cruise control
* Rad cap is not included
Feature:
  -16OR (O-Ring) Outlet
  -12OR (O-Ring) Filler Inlet (filler neck size)

These K-Tuned upper coolant housings will provide several unique advantages over the stock units. The hose outlet (the none AN fitting) on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment.
This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. 

The Filler Neck on this housing can be used to relocate the radiator cap to a higher point on the engine itself. The new location is the highest point of the cooling system and allows air pockets to easily escape during the coolant bleeding process. The filler neck was designed for use with an OEM 92-00 Honda Civic radiator cap. This filler neck will be very helpful on an engine that already has a bad reputation for coolant bleeding.

Radiator cap sold separately.
View AllClose