K-Tuned Oil Pressure Sensor Adapter 1/8 BSPT thread with 1/8 NPT ports

Part number: KTD-OPS-ADA

For use with 1/8 BSPT Thread found on OEM Honda sensor location

Before 1/8 BSPT adapter became available, most DIYer would force an 1/8 NPT into 1/8 BSPT and hoping that it seal, with this K-Tuned Oil Pressure Sensor Adapter, you can now thread in your aftermarket sensor in a safe and leak free manner. 

Note:
* It is recommended to use teflon tape on all tappered threads (NPT and BSPT)
* Comes with Extra O-Ring and 2 x 1/8 NPT plugs

**For instructions click here**
The oil pressure sensor adapter is must have when adding additional oil sensors or wanting to easily add a feed line. Designed with 1/8BSPT male thread to match Honda Block. The adapter offers a couple nice features to help installation and prevent problems. There is three 1/8NPT threads ports around the body which allows you to select the direction of your fitting or sensor. This sensor adapter have retained the stock 1/8BSPT thread to match stock sensor. The two piece design uses double o-ring seal to prevent any chance of leaks. The jam nut will provide additional support which is necessary when moving the sensor or adding additional sensors further from the block. The kit includes extra o-rings, and two 1/8NPT plugs.