K-Tuned Cooling

Application: All K24 Engines  Note: *When installing that the adapter gets mounted directly to the head (Do Not Install A Gasket Between The He...

EG, EK (EKK2 Mounts Only) with K20A, K20A2, K20A3 or K20Z1 cylinder head This K-Tuned Passenger radiator drops right into the oem passenger side ra...

K20A, K20A2, K20Z1 Cylinder Head or K-series cylinder heads with heater hose fitting beside the header Some of you may be interested in deleting th...

If you decied to remove the oen heater hose pipe, this K-Tuned Thermostat Plug and bracket is just what you need, it allows you to remove the oem h...

K-Tuned K Swap Driver Side Radiator Hoses with fan switch bung. Applications: EG, DC2, EK with 92-00 Civic driver side radiator and K20A, K20A2, K2...

Applications: 06-11 Civic (Si model only)K-Tuned 8th Gen Civic SI Radiator Hoses are designed as a direct replacement for your worn out and cheap f...

Applications: 02-06 RSX (all models) 02-05 EP3 Civic 2002 RSX, 2003 RSX, 2004 RSX K-Tuned RSX/EP3 Radiator Hoses are designed as a direct replaceme...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads.Features a -16OR (O-Ring) OutletWhen putting a K20 into a RWD vehicle the housing typ...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads.Features a -16OR (O-Ring) OutletWhen putting a K20 into a RWD vehicle the housing typ...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads.Features a -16OR (O-Ring) OutletWhen putting a K20 into a RWD vehicle the housing typ...

Application: K-Tuned Water Pump and all K-Series Blocks Including K24Z SeriesThe water pump mount bracket is a nice and simple way to mount your K-...

Applications: Used on K-swapped EF, EG, EK and DC2 chassis. This simple one wire sensor is needed on all K-swapped EF, EG, EK and DC2 chassis. It a...

Applications: All K-series enginesThe K-Tuned heater hose delete cap is used to block off any unused 5/8” diameter coolant ports. They come in hand...

Applications: EG, DC2, EK (EKK2 mounts only)NOTE: These only fit with K20A/A2/A3 and Z1 engine or cylinder heads.Check out our K-Tuned pre-fit sili...

Applications: EG, DC2, EKHere is our K-Tuned heater hose adapter in a kit. This kit includes our adapter with quality high temp rated silicone hose...

Driver-Side Rad Hose Kit w/ Rad Brackets - K24 (EG/DC2/EK) - Note: NO FAN SWITCH BUNG

The K-Tuned K24 K Swap Driver Side Radiator Hoses  work with driver side mounted radiator setup, aftermarket 92-00 Civic rad that has been relocate...

K-Tuned K20-Swap Silicone Radiator Hoses for use with RSX Radiator Applications: EG, DC2 & EK (w/ EKK2 mounts only) with OEM or aftermarket RSX...

K-Tuned  Radiator Hose w/ Radiator relocation bracket for K Swap using a EG/EK B Series Radiator is complete rad relocation package.  It comes with...

K-Tuned Coolant Recirculation Hose The factory coolant recirculation get soft and expands over time, which has a high risk to collpase and leak at ...